Print Jobs Won't Stick to Printer Bed

Post any question related to da Vinci series printers here.

Print Jobs Won't Stick to Printer Bed

Postby CT » Mon May 28, 2018 6:42 am

I am having problems getting print jobs to stick to the print bed once the filament comes out of the extruder. The filament just balls up on the extruder. Customer support suggested adjusting the Z-setting (see the video at
https://www.youtube.com/embed/yIi5E6uI7 ... ng_pref=en), but that adjustment isn't working. Why won't the filament stick to the print bed? This problem is very frustrating.
CT
New Arrival
 
Posts: 1
Joined: Mon May 28, 2018 6:36 am

Re: Print Jobs Won't Stick to Printer Bed

Postby valguerra » Wed Jun 06, 2018 4:31 pm

I use the green heat resistan tape and glue. Work fine
valguerra
New Arrival
 
Posts: 1
Joined: Wed Jun 06, 2018 4:30 pm

Re: Print Jobs Won't Stick to Printer Bed

Postby DrC » Sat Jul 07, 2018 10:35 am

Which model?

I have sorted both adhesion and to a large extent warping on the AIO, but I'm still struggling with the 1.0 Pro.
DrC
Apprentice
 
Posts: 16
Joined: Sat Jul 07, 2018 10:25 am

Re: Print Jobs Won't Stick to Printer Bed

Postby Lalit » Mon Jul 23, 2018 1:52 am

Having the same problem here. Any tip out there?
Lalit
New Arrival
 
Posts: 1
Joined: Mon Jul 23, 2018 1:50 am

Re: Print Jobs Won't Stick to Printer Bed

Postby SindyB » Fri Jul 27, 2018 3:45 am

Hi

This might sound really silly and very typical. But I use hairspray and works like a charm.
SindyB
New Arrival
 
Posts: 2
Joined: Fri Jul 27, 2018 3:27 am


Return to da Vinci Series

Who is online

Users browsing this forum: Bing [Bot] and 1 guest